Load data for 9 mm Browning Court (.380 ACP) + .355 | 92.6gr | Sellier & Bellot FMJ

Recommended Powder(s): Maxam CSB 2

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.355 \| 92.6gr \| Sellier & Bellot FMJ
Manufacturer SKU:	31912
Bullet Weight:	93gr \| 6.0g
Bullet Diameter:	0.355" \| 9.02mm
Bullet Length:	0.476" \| 12.1mm
Caliber:	9 mm Browning Court (.380 ACP) load data
Case Length (l3):	0.681" \| 17.3mm
Cartridge Length (C.O.L.):	0.969" \| 24.6mm
Seated Depth:	0.188" \| 4.8mm
Shank Seated Depth:	0.188" \| 4.8mm
Case Capacity:	12.2 Grains of Water \| 0.79 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	19580 psi \| 1350 bar
LID:	LID_B7243_C1213
Last updated:	2025-02-02

Load data for 72 loads in caliber 9 mm Browning Court (.380 ACP) with .355 | 92.6gr | Sellier & Bellot FMJ bullet and 36 powders such as Maxam CSB 2. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 70N	<<locked>>	72%	17318	88%	**06	95%
ADI APS 350	<<locked>>	65%	17550	90%	**8	100%
ADI APS 450	<<locked>>	69%	17390	89%	**1	100%
ADI AS 30	<<locked>>	74%	16563	85%	**17	100%
ADI AS 50N	<<locked>>	73%	16955	87%	**50	98%
[Accurate No. 2]*	<<locked>>	78%	17579	90%	**40	82%
Accurate Solo 1000	<<locked>>	73%	16795	86%	**24	99%
Accurate Solo 1250	<<locked>>	86%	17477	89%	**79	94%
[Alliant BULLSEYE]*	<<locked>>	71%	16302	83%	**63	86%
[Alliant UNIQUE]*	<<locked>>	87%	16723	85%	**06	86%
Baschieri & Pellagri 100	<<locked>>	79%	16940	87%	**37	97%
Hodgdon Clays	<<locked>>	65%	17434	89%	**1	100%
Hodgdon Universal	<<locked>>	80%	17318	88%	**06	95%
[Hodgdon TrailBoss]*	<<locked>>	93%	6048	31%	**6	88%
Lovex S011	<<locked>>	66%	17463	89%	**40	95%
[Lovex S020]*	<<locked>>	80%	16868	86%	**93	89%
Maxam CSB 1	<<locked>>	87%	16549	85%	**56	93%
Maxam CSB 2 👍	<<locked>>	92%	16447	84%	**38	99%
Maxam CSB 3	<<locked>>	81%	17071	87%	**70	98%
Maxam CSB 4	<<locked>>	75%	16273	83%	**40	99%
Maxam CSB 5	<<locked>>	70%	16491	84%	**24	100%
[Ramshot Silhouette]*	<<locked>>	72%	17245	88%	**93	83%
ReloadSwiss RS 12	<<locked>>	80%	17231	88%	**52	100%
[ReloadSwiss RS 20]*	<<locked>>	90%	16592	85%	**99	88%
Rottweil P 801	<<locked>>	70%	16172	83%	**89	100%
[SNPE Vectan A0]*	<<locked>>	87%	17521	90%	**56	86%
SNPE Vectan BA 9	<<locked>>	77%	17448	89%	**50	91%
SNPE Vectan BA10	<<locked>>	64%	17376	89%	**1	100%
SNPE Vectan BA9 1/2	<<locked>>	79%	16926	86%	**70	93%
[Somchem MP200]*	<<locked>>	79%	16911	86%	**79	84%
[Somchem MS200]*	<<locked>>	82%	17172	88%	**73	88%
Vihtavuori N320	<<locked>>	80%	17347	89%	**96	100%
Vihtavuori N32C Tin Star	<<locked>>	94%	12299	63%	**1	100%
Vihtavuori N330	<<locked>>	82%	15911	81%	**96	95%
[Vihtavuori N340]*	<<locked>>	84%	16433	84%	**66	86%
Winchester 231	<<locked>>	65%	16650	85%	**56	95%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
[ADI AP 70N]*	<<locked>>	60%	12169	62%	**8	89%
ADI APS 350	<<locked>>	61%	15505	79%	**6	100%
ADI APS 450	<<locked>>	60%	14069	72%	**9	100%
ADI AS 30	<<locked>>	61%	12111	62%	**6	99%
ADI AS 50N	<<locked>>	61%	12473	64%	**8	95%
[Accurate No. 2]*	<<locked>>	74%	16099	82%	**04	80%
Accurate Solo 1000	<<locked>>	60%	12314	63%	**9	95%
[Accurate Solo 1250]*	<<locked>>	60%	8702	44%	**0	81%
[Alliant BULLSEYE]*	<<locked>>	61%	12343	63%	**5	81%
[Alliant UNIQUE]*	<<locked>>	76%	12966	66%	**4	81%
Baschieri & Pellagri 100	<<locked>>	60%	10080	51%	**6	90%
Hodgdon Clays	<<locked>>	61%	15418	79%	**9	100%
[Hodgdon Universal]*	<<locked>>	63%	10979	56%	**9	87%
[Hodgdon TrailBoss]*	<<locked>>	86%	5511	28%	**3	86%
Lovex S011	<<locked>>	63%	15722	80%	**01	94%
[Lovex S020]*	<<locked>>	64%	10660	54%	**6	80%
[Maxam CSB 1]*	<<locked>>	60%	8441	43%	**4	81%
[Maxam CSB 2]*	<<locked>>	62%	7629	39%	**3	86%
Maxam CSB 3	<<locked>>	62%	10327	53%	**3	90%
[Maxam CSB 4]²	<<locked>>	59%	10646	54%	**9	94%
Maxam CSB 5	<<locked>>	62%	13053	67%	**5	100%
[Ramshot Silhouette]*	<<locked>>	67%	14837	76%	**30	80%
ReloadSwiss RS 12	<<locked>>	60%	9253	47%	**9	94%
[ReloadSwiss RS 20]*	<<locked>>	77%	11922	61%	**5	80%
Rottweil P 801	<<locked>>	61%	12140	62%	**4	99%
[SNPE Vectan A0]*	<<locked>>	77%	13634	70%	**5	81%
[SNPE Vectan BA 9]*	<<locked>>	61%	11414	58%	**9	83%
SNPE Vectan BA10	<<locked>>	60%	15737	80%	**5	100%
[SNPE Vectan BA9 1/2]*	<<locked>>	62%	10762	55%	**6	85%
[Somchem MP200]*	<<locked>>	73%	14518	74%	**14	81%
[Somchem MS200]*	<<locked>>	68%	12212	62%	**2	81%
Vihtavuori N320	<<locked>>	61%	10051	51%	**2	94%
Vihtavuori N32C Tin Star	<<locked>>	63%	6121	31%	**5	94%
[Vihtavuori N330]*	<<locked>>	62%	9123	47%	**3	83%
[Vihtavuori N340]*	<<locked>>	74%	12662	65%	**1	81%
Winchester 231	<<locked>>	62%	15273	78%	**17	93%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data